ACDelco Professional, premium aftermarket AGM Voyager batteries have high cycling capabilities and are remarkably charge-receptive. The Absorbed Glass Mat design is 100% leak and spill proof because the Electrolyte is permanently held in the glass mat separator instead of free flowing within each cell. Oxygen recombination reduces water loss and reassures maintenance-free performance. Engineered with heavier, thicker plates ACDelco Professional AGM Voyager batteries can withstand the potential damage of continual deep discharging and recharging. Both positive and negative grids are built with lead-calcium alloy to maximize corrosion resistance, optimize cycle life and reduce water consumption for battery durability. ACDelco Professional AGM Voyager batteries also include quick-glance charge monitoring. These premium aftermarket AGM Voyager batteries are manufactured to meet your expectations for fit, form, and function.

  • Maintenance-free Absorbed Glass Mat (AGM) technology – no water required, no spills, no leaks, and no maintenance
  • AGM technology for our best deep cycle performance
  • Leak-proof pressurized valve system is engineered with safety and longevity in mind. Prevents dry-out and acid damage to the terminals
  • High density plate oxide provides for maximum power-per-pound and dependable ‘high cycling’ service
  • Heavy top Lead and large through-partition connections, maximizes power output; optimizes durability, vibration resistance and auto battery life

Link

ACDelco Professional, premium aftermarket AGM Voyager batteries have high cycling capabilities and are remarkably charge-receptive. The Absorbed Glass Mat design is 100% leak and spill proof because the Electrolyte is permanently held in the glass mat separator instead of free flowing within each cell. Oxygen recombination reduces water loss and reassures maintenance-free performance. Engineered with heavier, thicker plates ACDelco Professional AGM Voyager batteries can withstand the potential damage of continual deep discharging and recharging. Both positive and negative grids are built with lead-calcium alloy to maximize corrosion resistance, increase cycle life and reduce water consumption for battery durability. ACDelco Professional AGM Voyager batteries also include quick-glance charge monitoring for worry free use. These premium aftermarket AGM Voyager batteries are manufactured to meet your expectations for fit, form, and function. Warning:  Automobile parts, accessories and ancillary chemicals contain chemicals known to the state of California to cause cancer, birth defects and other reproductive harm. Wash hands after using.

Link


Battery Series:

“PRO” (ACDelco Professional)

The Professional category of high-quality aftermarket products covers most GM OE vehicles as well as many other makes and models (varies by product line). Most of the current ACDelco line falls into this category, which is a high-quality alternative to GM OE products.

Brand: GENERAL MOTORS OE


Design:

The essence of the discovery lies in the complete rejection of the liquid state of the electrolyte. She was replaced by a special woven material. In this case, a mixture of sulfuric acid and distilled water turns out to be bound by the structure of synthetic mats. It should be noted that the small pores of the material serve to retain the droplets of electrolyte, and large (capillary forces leave them free) – for the circulation of vapors that do not have time to condense in the cavity of the battery.

Note that in batteries with AGM technology, only lead of high qualification (degree of chemical purity) is used. Another innovation is antimony and calcium additives, which significantly extend the service life of the plates.

  • This type of battery is maintenance-free. And this means that care for them is reduced to a minimum;
  • Has a large starting current. So, in comparison with acid batteries – it is higher by 50-75%, which is priceless at launch in the cold season;
  • Not afraid of deep discharge. Even the average AGM battery should cope with at least two hundred complete discharges (by zero), at least 500 batteries of batteries up to 50% and with 1000 batteries that lower the capacity by 20-30%;
  • It is allowed to transport and operate in almost any position;
  • AGM service life is from 5 to 12 years (with obligatory observance of charging rules);
  • Neutral to high ambient temperature (for example, in the car’s engine compartment). This puts them in rank above all classical and most batteries.

The essence of the discovery lies in the complete rejection of the liquid state of the electrolyte. She was replaced by a special woven material. In this case, a mixture of sulfuric acid and distilled water turns out to be bound by the structure of synthetic mats. It should be noted that the small pores of the material serve to retain the droplets of electrolyte, and large (capillary forces leave them free) – for the circulation of vapors that do not have time to condense in the cavity of the battery.

Note that in batteries with AGM technology, only lead of high qualification (degree of chemical purity) is used. Another innovation is antimony and calcium additives, which significantly extend the service life of the plates.


Tip:

Important! Accumulators using AGM technology can not be accepted for all tasks. This type of battery is very close to recharging. This means that if the car is not equipped with a device that excludes an excess of charge, it is worthwhile to refrain from buying such batteries.

Important! Charging the AGM battery with a current of greater power will significantly shorten the charging time, but it can also damage the battery. Therefore, resort to such a regime should be only in exceptional cases!

 

https://youtu.be/hjmRm1aBHYg

 

Car Battery: Professional Batteries & Warranties | ACDelco